During the Retell portion of the community check, you will play the passage for the community and record their responses. After listening to the set, Render will display the first Retell page for the first passage.


To start the Retell portion of Community Check:


1.Press the yellow Play button on the player.


Note: If the play button is blue as soon as you enter the page, it means that you have a single passage set. The audio loaded here is therefore the same audio as the set listen page and is therefore an optional listen.


After listening through the top player, you will have an active recorder.



1. Home button
2. Set title listen
3. Passage bar player
4. Retell recorder
A. Record/Append button
B. Play button
C. Selection
D. Delete button
5. Submit button

Hitting the Home button (1) will bring you back to your Home page. Clicking Play on the Set Title (2) will play the description of the set you are working on.

This page has everything that the community needs in order to record a retelling of the translation. At the top of the page is the Passage bar player (3) that can be played with the Play button (3a). This player is loaded with the first passage in the set.

Below the Set player you will see your Retell recorder (4). After listening to the passage, you will be able to record or add more to that recording (4a). If you want to listen to your recording, press the Play button (4b). You can also select your recording (4c), or if you used the Append button and have appends, select a piece of the recording, and delete that part of your recording (4d).

After the community has recorded their retellings, you can press the Submit button (5) and you will be brought to the next passage in this set.


Steps of Community Check Retell



1. Press the yellow or blue Play button the bar player. This will play the passage for the community.


2. Press the Play button again as many times as needed until the community is comfortable retelling the passage.


3. Press the Record button and record the community’s retelling. Use the other buttons to edit your recording as needed. You can:
    

    a. Add to the recording by pressing the Append button.
    

    b. Play your recording by pressing the Play button.


    c. Delete part of your recording by selecting it (clicking on the waveform) and pressing the Delete button.


4. When the community is done with the passage, press the Finished button.


5. Complete steps one through four above for each passage in the set.


When you have gone through the Retell page for every passage in the set, Render will take you to the same set in Question and Response if it is turned on. If the Configure role only has Retell turned on for Community Check, you will be done with Community Check for this set. If there are more sets in Community Check, Render will bring you the next set. If there are no more sets in Community Check, Render will take you to the Home page.