࣪

You can get to the section status page by clicking the three dot menu then clicking Section Status:

1. Back button

2. Menu button

3. Right arrow

4. Down arrow

Press the arrows pointing right (3) to open the options of that topic. Press the down arrows (4) to close the options of that topic. To leave this page, press the Back button (1) or press the menu button (2)

5. Section

6. Section Information

If you select a section (5), a section information box (6) will appear.

Recovery

The consultant has access to recovery.

1. Back button

2. Menu

3. Processes/Recovery

4. Jump to Section

5. Section - highlighted

6. Snapshot - most recent

7. Snapshot - previous

8. Reset Section

9. Play button

The consultant will have an option to view Processes or Recovery (3) to either view the current status or snapshot (6) of a particular section.  In this example, the current snapshot (6) was taken at the Peer Check user group on 3/28/2023, and is assigned to Consultant Check.  If the consultant wanted to send it back to Peer Check, they could press the radio button by Snapshot - 3/26/2023 (7) to remove the work done by Peer Check and send it back to them. The section can be returned to any prior snapshot, or even start completely over by pressing the radio button for Reset Section (8). To leave this screen, either toggle back to Processes (3), press the back button (1) or click the menu (2).

1. Snapshot - previous

2. Restore button

In the above example, the radio button by Snapshot - 3/26/2023 (1) was pressed, and a Restore button (2) was generated.  Press the Restore button (2) to lose the changes made by Peer Check and move the work from Consultant Check back to Peer Check.

A confirmation popup window appears:

1. Cancel button

2. Restore Section

3. Close/Cancel

Press the cancel button (1) or the close/cancel (3) to cancel, or press restore section (2) to remove the work and send back to a previous user group to re-do.

1. Snapshot (was current)

2. Snapshot (now current)

After restoring the section, the work in this example for Peer Check was deleted and sent back to Peer Check to re-record.

1. Processes/Recovery

2. Arrow

3. Peer Check

By clicking Processes (1), then clicking the Peer Check arrows (2), you can see the section we were working on has indeed been assigned back to Peer Check (3).

*This can be turned off in Project Configuration if not needed for the consultant.

**This page can be turned off in Project Configuration if desired.