Draft Stage is where you record the first audio draft of your translation.

In Render 3, the Draft Stage is locked as the first step of the translation workflow. Settings within the Draft Stage can be altered but the stage itself cannot be removed. This article is based on default settings within the stage. The following symbol is used throughout the article to inform you of possible variations in configuration:

*  This page/feature can be turned off in Project Configuration if desired. Be advised that if you turn off both Section Review and Passage Review then you will lose the ability to record notes on the passage.

 

Tap on the Draft icon from the Project Home page:


The Section Listen page will open (see below). On this page, the Section with the highest priority will be loaded into the player. A Section has one or more Passages. Listening to the entire Section gives you the context needed for understanding each Passage in the Section. Passages are put together in a Section because they are related by a theme.


 

Draft: Section Listen*

  1. References: Full Section audio for up to four reference Bible versions.
  2. Section number and audio title: If the title audio has been added to your project, a play button will be displayed. Tapping it will play the Section title audio.
  3. Home: Tapping this brings you to your Project Home page (see first screenshot above).
  4. Menu: Home page, Section Status, Export Audio, Project List, Sync, and Log Out
  5. Back: Tapping this will either bring you back one page (if possible) or return you to your Home page.
  6. Next: When Section Listen Guidance* is turned on (yellow color), this Next button is inactive (grey color) until the Reference audio has been played. At that time, the Next button becomes dark blue and active. Tapping it will cause Render to proceed to the next screen. 


Draft: Passage Listen*  

  1. References: In the Passage Listen page, these players play the audio for this passage only; not the entire Section.
  2. Passage number: Drafting is done one passage at a time.
  3. Menu: Project Home, Section Status, Export Audio, Project List, Sync, Log Out.
  4. Next: When Passage Listen Guidance* is turned on (yellow color), this Next button is inactive (grey color) until the Reference audio has been played. At that time, it becomes dark blue and active.


Draft: Draft Record

  1. Reference audio: Audio of this Passage in each Reference audio Bible.
  2. Passage number: When a passage has been divided (see Passage Divide), the number will appear as in this example. This is Passage "1.1" of Section 5. Be aware that all desired divisions for that passage must be made before any drafting is completed. If the Passage was divided into three pieces, your Passage numbers would be X.1, X.2 and X.3 where X is the original number of the Passage. Each of these sub-passages must be translated one at a time, just like Passages.
  3. Drafts (up to 6): Dark background is the active or selected draft. Others are inactive or unselected. 
  4. Record button: Tapping this will start a new recording in the selected draft (Draft 1 in this example).
  5. Waveform: The recorded audio in the selected draft will appear here. See the next screenshot.
  6. Trash Can: Tap to delete the audio in the selected draft. Can also be tapped to recover a draft that was recently deleted using the Trash Can.
  7. Next button: Proceeds to the draft choice screen where you select which draft you will push forward in the workflow.


See this brief example of the drafting process in action:


Notice the upper (tall) and lower (short) waveforms. The lower waveform shows the entire recording. The upper shows a smaller portion of the recording. See the benefit of this design in the following GIF:




Draft: Draft Select



  1. Drafts: Lists all current drafts. Select one to proceed. 
  2. Selector: Tap the circle of the Draft you want to select. It will turn dark blue when selected.
  3. Next: Tap this to proceed. Render will only save the selected Draft




Draft: Passage Review*


  1. References: audio of this Passage in each Reference audio Bible
  2. Play: tap this to play the Draft. 
  3. Note: notes can be made for the Peer team who will check this Draft. Before making a note, find the place in the Draft where you want the note to appear. Tap that location. Then tap the Note button. See the “Making Notes Example” GIF below.
  4. Re-record (optional): tap this to return to the Draft Record page and record a new draft (for example, to fix a problem they found during the review process).


If you have more Passages to record within the Section, tapping the Next button will take you to the ‘Draft: Passage Listen’ page for the next Passage.

 

Draft: Making Notes (optional)



For more information about making notes in this and other stages, read the article "How to: Record a Note"



Draft: Section Review*


When all Passages have been recorded, you will review the entire Section here if Section Review is turned on in the Draft settings:


  1. References: Each player will play the Reference Bible audio of the entire Section.
  2. Passages: The screen shows all Passages in the Section (labeled A, B and C in the image above). When a Passage is selected, like Passage 1.1 in the image above, tapping the Re-record button will take you to the ‘Draft: Draft Record’ page for that Passage.
  3. Finished: This is the last step in the Draft stage for this Section. Tapping the Finished button will complete the Draft work for that Section and take you back to the Project Home page.